
INSTRUMENTATION
pH Range
The full range of instrumentation is available for inclusion in stand alone, multi-parameter and Engineers test kits.
Eutech EcoTester pH1
-
0.0 - 14.0 Full pH range
-
Auto-calibration and auto-buffer recognition
-
IP67 Waterproof - tester floats on water for easy retrieval
-
Long sensor life - no need to change the sensors
-
Click-lock battery compartment requires no tools for battery replacement
-
Hold function freezes reading temporarily for ease of recording
-
Sensor protection cap that doubles up as a container for samples or calibration solution

EcoTester EC HIGH

-
0 - 19.90 mS/cm
-
Up to +1% full scale accuracy
-
IP67 Waterproof - tester floats on water for easy retrieval
-
Manual calibration option for better accuracy with near-to-sample calibrations
-
Click-lock battery compartment requires no tools for battery replacements
-
Hold function freezes reading temporarily for ease of recording
-
Sensor protective cap that doubles up as a container for samples or calibration solution
Eutech pH 5+
-
Multi-Point Calibration (up to 5 points) with Auto-Buffer Recognition - choice of USA, NIST or pure water standards with +0.01 pH accuracy
-
Automatic Temperature Compensation (ATC) for the highest accuracy under fluctuating temperatures
-
Hold Funcion momentarily freezes reading for easy viewing and recording
-
Auto-Power Off saves battery power after non-use
-
Self-Diagnostic with message codes for easy troubleshooting
-
Large Custom LCD provides optimum viewing even at a distance
-
Protective Rubber Boot shields mete from accidental knocks and features a sturdy built-in stand for easy bench-top operation

Eutech EcoScan pH 5

-
Multi-Point Calibration (up to 3 points) with Auto-Buffer Recognition - choice of USA, NIST or pure water standards with +0.01 pH accuracy
-
Automatic Temperature Compensation (ATC) for the highest accuracy under fluctuating temperatures
-
Hold Funcion momentarily freezes reading for easy viewing and recording
-
Auto-Power Off saves battery power after non-use
-
Self-Diagnostic with message codes for easy troubleshooting
-
Large Custom LCD provides optimum viewing even at a distance
-
Protective Rubber Boot shields mete from accidental knocks and features a sturdy built-in stand for easy bench-top operation
Conductivity Range
The full range of instrumentation is available for inclusion in stand alone, multi-parameter and Engineers test kits.
Eutech EcoTester EC High
-
0.0 - 14.0 Full pH range
-
Auto-calibration and auto-buffer recognition
-
IP67 Waterproof - tester floats on water for easy retrieval
-
Long sensor life - no need to change the sensors
-
Click-lock battery compartment requires no tools for battery replacement
-
Hold function freezes reading temporarily for ease of recording
-
Sensor protection cap that doubles up as a container for samples or calibration solution

Eutech COND 6+

-
Multi-Point Push-button Calibration (up to 5 points) with +1 % accuracy
-
Option of quick, easy automatic calibration or customised, near-to-sample manual calibration
-
Auto-Ranging for Conductivity/TDS measurements for fast response and best resolution over wide measurement range
-
Automatic Temperature Compensation (ATC) for the optimum accuracy under fluctuating temperatures
-
Hold Funcion momentarily freezes reading for easy viewing and recording
-
Auto-Power Off saves battery power after non-use
-
Self-Diagnostic with message codes for easy troubleshooting
-
Large Custom LCD provides optimum viewing even at a distance
-
Electrode with Built-in ATC designed for minimal air bubble entrapment during measurement
-
Protective Rubber Boot shields mete from accidental knocks and features a sturdy built-in stand for easy bench-top operation
Eutech EcoScan CON 6
-
Multi-Point Push-button Calibration (up to 5 points) with +1 % accuracy
-
Automatic or Manual Calibration - for quick, easy calibration: use automatic mode with preset calibration points at most popular values or manually set values in the manual mode for more flexibility
-
Auto-Ranging for Conductivity/TDS measurements for fast response and best resolution over wide measurement range
-
Adjustable TDS Factor for more accurate measurement (for TDS 6 model only)
-
Automatic Temperature Compensation (ATC) for the optimum accuracy under fluctuating temperatures
-
Hold Funcion momentarily freezes reading for easy viewing and recording
-
Auto-Power Off saves battery power after non-use
-
Self-Diagnostic with message codes for easy troubleshooting
-
Large Custom LCD provides optimum viewing even at a distance
-
Electrode with Built-in ATC designed for minimal air bubble entrapment during measurement
-
Protective Rubber Boot shields mete from accidental knocks and features a sturdy built-in stand for easy bench-top operation

Eutech EcoScan CON 6
pH/mV/Conductivity/Total Dissolved Solids/Salinity/Temperature
PC 450 accepts a single pH/con probe or separate pH and conductivity probes


-
Durable waterproof and dustproof design with IP67 rating
-
Switch between pH, mV, conductivity, TDS and salinity with a press of a button
-
Large, backlit custom display - Lets you view measurement with temperature
-
Grip-ClipTM - Quickly and easily secures separate pH and conductivity electrodes simultaneously to your sample container or beaker
-
Calibrate up to 5 points automatically with USA or NIST buffer groups (up to 6 points with DIN). New manual options calibrate with up to 5 custom buffer standards
-
Auto buffer recognition - Automatically identifies the correct pH buffer for rapid calibration
-
Calibration due alarm - Set a visible reminder when it is time to re-calibrate the meter
-
Intuitive, user-friendly icons - Electrode status displays pH slope or cell constant
-
Auto-range conductivity from 0 to 199.9 mS in 5 ranges - With up to 5 calibration points
-
Selectable cell constant - o.10, 1.00 or 10.0
-
Adjustable temperature coefficient - From 0.00 to 10.00% per 'C
-
Conductivity-to-TDS factor - Adjustable from 0.40 to 1.00
-
Selectable 'C/'F - Choose units to best fit your application
-
Ready indicator, manual or automatic measurement hold feature and optical automatic shutoff function
-
Store up to 500 data sets; east USB or RS232 output with optical data cables
-
Built-in stand with wall-mount - Allows for easy benchtop measurement and storage
Water Analysis Test Kits and Reagents
