INSTRUMENTATION

pH Range

The full range of instrumentation is available for inclusion in stand alone, multi-parameter and Engineers test kits.

Eutech EcoTester pH1

  • 0.0 - 14.0 Full pH range

  • Auto-calibration and auto-buffer recognition

  • IP67 Waterproof - tester floats on water for easy retrieval

  • Long sensor life - no need to change the sensors

  • Click-lock battery compartment requires no tools for battery replacement

  • Hold function freezes reading temporarily for ease of recording

  • Sensor protection cap that doubles up as a container for samples or calibration solution

EcoTester  pH1

EcoTester EC HIGH

ecotestrechigh.gif
  • 0 - 19.90 mS/cm

  • Up to +1% full scale accuracy

  • IP67 Waterproof - tester floats on water for easy retrieval

  • Manual calibration option for better accuracy with near-to-sample calibrations

  • Click-lock battery compartment requires no tools for battery replacements

  • Hold function freezes reading temporarily for ease of recording

  • Sensor protective cap that doubles up as a container for samples or calibration solution

Eutech pH 5+

  • Multi-Point Calibration (up to 5 points) with Auto-Buffer Recognition - choice of USA, NIST or pure water standards with +0.01 pH accuracy

  • Automatic Temperature Compensation (ATC) for the highest accuracy under fluctuating temperatures

  • Hold Funcion momentarily freezes reading for easy viewing and recording

  • Auto-Power Off saves battery power after  non-use

  • Self-Diagnostic with message codes for easy troubleshooting

  • Large Custom LCD provides optimum viewing even at a distance

  • Protective Rubber Boot shields mete from accidental knocks and features a sturdy built-in stand for easy bench-top operation

Eutech EcoScan pH 5

  • Multi-Point Calibration (up to 3 points) with Auto-Buffer Recognition - choice of USA, NIST or pure water standards with +0.01 pH accuracy

  • Automatic Temperature Compensation (ATC) for the highest accuracy under fluctuating temperatures

  • Hold Funcion momentarily freezes reading for easy viewing and recording

  • Auto-Power Off saves battery power after  non-use

  • Self-Diagnostic with message codes for easy troubleshooting

  • Large Custom LCD provides optimum viewing even at a distance

  • Protective Rubber Boot shields mete from accidental knocks and features a sturdy built-in stand for easy bench-top operation

Conductivity Range

The full range of instrumentation is available for inclusion in stand alone, multi-parameter and Engineers test kits.

Eutech EcoTester EC High

  • 0.0 - 14.0 Full pH range

  • Auto-calibration and auto-buffer recognition

  • IP67 Waterproof - tester floats on water for easy retrieval

  • Long sensor life - no need to change the sensors

  • Click-lock battery compartment requires no tools for battery replacement

  • Hold function freezes reading temporarily for ease of recording

  • Sensor protection cap that doubles up as a container for samples or calibration solution

ecotestrechigh (2).gif

Eutech COND 6+

  • Multi-Point Push-button Calibration (up to 5 points) with +1 % accuracy

  • Option of quick, easy automatic calibration or customised, near-to-sample manual calibration

  • Auto-Ranging for Conductivity/TDS measurements for fast response and best resolution over wide measurement range

  • Automatic Temperature Compensation (ATC) for the optimum accuracy under fluctuating temperatures

  • Hold Funcion momentarily freezes reading for easy viewing and recording

  • Auto-Power Off saves battery power after  non-use

  • Self-Diagnostic with message codes for easy troubleshooting

  • Large Custom LCD provides optimum viewing even at a distance

  • Electrode with Built-in ATC designed for minimal air bubble entrapment during measurement

  • Protective Rubber Boot shields mete from accidental knocks and features a sturdy built-in stand for easy bench-top operation

Eutech EcoScan CON 6

  • Multi-Point Push-button Calibration (up to 5 points) with +1 % accuracy

  • Automatic or Manual Calibration - for quick, easy calibration: use automatic mode with preset calibration points at most popular values or manually set values in the manual mode for more flexibility

  • Auto-Ranging for Conductivity/TDS measurements for fast response and best resolution over wide measurement range

  • Adjustable TDS Factor for more accurate measurement (for TDS 6 model only)

  • Automatic Temperature Compensation (ATC) for the optimum accuracy under fluctuating temperatures

  • Hold Funcion momentarily freezes reading for easy viewing and recording

  • Auto-Power Off saves battery power after  non-use

  • Self-Diagnostic with message codes for easy troubleshooting

  • Large Custom LCD provides optimum viewing even at a distance

  • Electrode with Built-in ATC designed for minimal air bubble entrapment during measurement

  • Protective Rubber Boot shields mete from accidental knocks and features a sturdy built-in stand for easy bench-top operation

Eutech EcoScan CON 6

pH/mV/Conductivity/Total Dissolved Solids/Salinity/Temperature

PC 450 accepts a single pH/con probe or separate pH and conductivity probes

  • Durable waterproof and dustproof design with IP67 rating

  • Switch between pH, mV, conductivity, TDS and salinity with a press of a button

  • Large, backlit custom display - Lets you view measurement with temperature

  • Grip-ClipTM - Quickly and easily secures separate pH and conductivity electrodes simultaneously to your sample container or beaker

  • Calibrate up to 5 points automatically with USA or NIST buffer groups  (up to 6  points with DIN). New manual options calibrate with up to 5 custom buffer standards

  • Auto buffer recognition - Automatically identifies the correct pH buffer for rapid calibration

  • Calibration due alarm - Set a visible reminder when it is time to re-calibrate the meter

  • Intuitive, user-friendly icons - Electrode status displays pH slope or cell constant

  • Auto-range conductivity from 0 to 199.9 mS in 5 ranges - With up to 5 calibration points

  • Selectable cell constant - o.10, 1.00 or 10.0

  • Adjustable temperature coefficient - From 0.00 to 10.00% per 'C

  • Conductivity-to-TDS factor - Adjustable from 0.40 to 1.00

  • Selectable 'C/'F - Choose units to best fit your  application

  • Ready indicator, manual or  automatic measurement hold feature and optical automatic shutoff function

  • Store  up to 500 data sets; east USB or RS232 output  with optical data cables

  • Built-in stand with wall-mount - Allows for easy benchtop measurement and storage

Water Analysis Test Kits and Reagents

© 2018 Aqua Test Kits Ltd. Proudly created with Wix.com